Harbor-freight-tools PACIFIC HYDROSTRAR 97005 User Manual download pdf (Page 16)

Page 16SKU 97005 For technical questions, please call 1-800-444-3353.

FIGURE K

DRAIN PLUG (14)

2. Remove the Drain Plug (14) and, if

possible, tilt the Crankcase slightly to

help drain the oil out. Recycle used

oil.

Replace the Drain Plug (14) and 3.

tighten it.

Rell the oil to the proper level follow-4.

ing the instructions under the “Start-

ing the Engine” section.

Air Filter Element Maintenance

FIGURE L

WING NUT (47)

AIR CLEANER COVER (51)

1. The Air Cleaner Cover (51) is held in

place by a Wing Nut (47). Remove it.

(See Figure L.)

Remove a second Wing Nut (47) and 2.

its Washer (48). Then remove the Air

Filter Element (49).

For lter elements: 3.

To prevent injury from dust and

debris, wear ANSI-approved safety

goggles, NIOSH-approved dust

mask/respirator, and heavy-duty work

gloves. In a well-ventilated area

away from bystanders, stand down

wind, and use pressurized air to blow

dust out of the Air Filter Element

(49). If this does not get the Filter

reasonably clean, replace it.

Install the new lter or the cleaned 4.

lter. Secure the Air Cleaner Cover

before use.

Spark Plug Maintenance

Disconnect spark plug wire from 1.

end of plug. Clean out debris from

around spark plug.

SPARK PLUG (60)

SPARK PLUG WIRE

FIGURE N

2. Using a spark plug wrench, remove

the spark plug. (See Figure N.)

Inspect the spark plug: 3.

If the electrode is oily, clean it us-

ing a clean, dry rag. If the electrode

has deposits on it, polish it using

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Comments to this Manuals

No comments

Harbor-freight-tools PACIFIC HYDROSTRAR 97005 User Manual Page 16

Comments to this Manuals

Related products and manuals for Carwash Harbor-freight-tools PACIFIC HYDROSTRAR 97005