Harbor-freight-tools PACIFIC HYDROSTRAR 97005 User Manual download pdf (Page 10)

Page 10SKU 97005 For technical questions, please call 1-800-444-3353.

Starting the Engine

Inspect engine and equipment

looking for damaged, loose, and

missing parts before set up and

starting. If any problems are

found, do not use equipment until

xed properly.

Checking Engine Oil Level

CAUTION! Your Warranty is VOID if the

engine’s Crankcase (13) is not properly

lled with oil before each use. Before

each use, check the oil level. Do not

run the engine with low or no engine

oil. Running the engine with no or low

engine oil WILL permanently damage the

engine.

FIGURE H

DIPSTICK (89)

1. Remove the dipstick and wipe it off with

a clean rag. (See Figure H.)

Reinsert the dipstick completely and 2.

remove it to check the oil level. The oil

level should be between the high and

low marks on the dipstick.

(See Figure H.)

If the oil level is below the low mark add 3.

the appropriate type of oil until the oil

level is between the high and the low

marks. (See Figure H.)

Oil type:

32° F or above = SAE 25W

Below 32° F = SAE 15W-40

Replace the Oil Dipstick. 4.

(See Figure H.)

CAUTION! Do not run the engine with too

little or too much oil. The engine will be

permanently damaged.

Checking Fuel Level

WARNING! To prevent re,

shut the engine off and wait for

it to cool before adding fuel. Do

not smoke. Avoid refueling if

other equipment (which may

create sparks) is operating in the

immediate vicinity.

To ll the Fuel Tank (101), unscrew and 1.

remove the Fuel Tank Cap (109). (See

Figure I.)

FUEL TANK (101)

FUEL TANK CAP (109)

FUEL TANK FILTER (108)

FIGURE I

2. Check to make sure the Fuel Tank

Filter (108) is free of dirt and debris.

If necessary, remove and clean the

Filter. Then replace the Filter.

(See Figure I.)

REV 09b, 09i

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Comments to this Manuals

No comments