Harbor-freight-tools HAUL MASTER 98511 User Manual download pdf (Page 3)

SKU 98511 For technical questions, please call 1-800-444-3353. Page 3

Assembly

Please note: The following tools are needed

(but not included) for proper assembly of

Truck Rack: Adjustable Wrench, Hacksaw,

Pen Marker, Center Punch and a Drill with

5/16” Drill bit.

Before assembly and installation, determine 1.

if truck has LONG or SHORT bed. Measure

length of truck bed with tailgate closed. Then

measure between Truck Rack’s Front and

Rear Leg Stands. Proper assembly depends

on knowing correct bed truck size.

Please note:2. During assembly, do not fully

tighten connections until specied.

Slide Rear Leg Stands (6, 7) into curved rail 3.

ends of Back Side Frames (3). Using wrench

(not included) fasten together with Bolts

(18), Nuts (19) and Flat Washers (20). See

Figure 1, below.

Slide each end of Rear Bar (12) over top 4.

ends of Back Side Frames. Fasten together

using Bolts (18), Nuts (19) and Flat Washers

(20). See Figure 2, above.

Thread Bolt (31) and Washer (34) through 5.

Rear Leg Stands (6, 7) and out from rear leg

bar bracket slots. Attach Washer (34) and

Nut (32) and then nger tighten. Repeats

these steps for the opposite side. See Fig-

ure 2, above.

The next step depends on bed truck size: 6.

For Short Bed Truck (5’- 7’ Long): Slide

Front Bar (10) onto BACK ends of Front Side

Frames (2). Then slide Front Leg Stands

(4, 5) onto Front Side Frames so they are

behind Front Frame’s cross bar. See Figure

3, below.

For Long Bed Truck (7’ or more): Slide

Front Bar (10) onto FRONT ends of Front

Side Frames (2). Then slide Front Leg

Stands (4) onto Front Side Frames so they

are in front of Frame’s cross bar. See Figure

4, below.

7. Fasten Front Leg Stands (4, 5) to Front Side

Frames (2), using Bolts (18), Nuts (19), and

Flat Washers (20).

8. Use Bolts (31), Nuts (32), Spring Washers

(33), and Flat Washers (34) to connect Leg

Stands (4, 5) to Front Bar (10).

Rear Leg

Stand (6)

Back Side

Frame (3)

Figure 1

Bolts (18)

Figure 2

Back Side

Frame (3)

Rear Leg

Stand (6)

Rear Bar

(12)

Bolts (21)

Bolts (31)

Figure 3

Cross Bar

Front Bar

(10)

Front Leg

Stand (4)

Front

Side

Frame (2)

Figure 4

Cross Bar

Front Bar (10)

Front Leg Stand (4)

REV 10c

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments