Harbor-freight-tools HAUL MASTER 98511 User Manual download pdf (Page 4)

SKU 98511 For technical questions, please call 1-800-444-3353. Page 4

9. Slide Front Side Frames (2) and Back Side

Frames (3) together. Attach two Clamp

halves (13) over connected portion of the

Side and Back frames. Use Bolts (15), Nuts

(16) and Flat Washers (17) to fasten Clamps

over connected frames. See Figure 5, below.

10. Slide ends of Cab Bar (1) over ends of Front

Side Frames. Fasten Cab Bar to Frame tips

using Bolts (35), Nuts (36), Spring Washers

(37) and Flat Washers (38). See Figure 6,

below.

11. Place Center Bar (11) between Front or Rear

Side Frames. Please note: Center Bar is

adjustable and can be fastened anywhere

along Side Frames. Fasten Center Bar to

Side Frames using Bolts (24), Nuts (25) and

Flat Washers (26). See Figure 7, below.

12. The Truck Rack comes with four Coupler Ris-

ers (14) that allow you to raise height of Rack

another 6” if desired. Fasten Coupler Risers

to bottom of each Leg Stand using Bolts

(27), Nuts (28), Spring Washers (29) and Flat

Washers (30). See Figure 8, below.

13. Fasten Front (8L, 8R) and Rear (9L, 9R)

Mounting Feet to Coupler Risers, using Bolts

(27), Nuts (28), Spring Washers (29) and Flat

Washers (30). See Figure 9, below.

Please note: All Mounting Feet must be

installed with lips facing towards INSIDE of

bed truck. See Figure 9, below.

14. Please note: If lower Truck Rack height is

desired, Leg Stands can be fastened directly

to Front and Rear Mounting Feet without

Coupler Risers. Use Bolts (27), Nuts (28),

Spring Washers (29) and Flat Washers (30)

to fasten Leg Stand to Feet. See Figure 10,

below.

Figure 6

Cab Bar (1)

Front Side Frame (2)

Bolt (35)

Nut (36)

Figure 7

Center Bar (11)

Clamps (13)

Figure 8

Mounting

Foot (8R, 9L)

Leg Stand

Coupler Riser (14)

Bolt (43)

Figure 9

Mounting Foot (8R, 9L)

with lip facing inside

(Inside of truck bed)

Figure 10

Leg Stand

Mounting Foot (8R, 9L) Bolt (27)

Figure 5

Clamps (13)

Front Side

Frame (2)

Back Side Frame (3)

REV 10c

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments