Harbor Freight Tools Motorized Rotary Laser Level Kit Manual download pdf (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 69247

Mounting To Tripod (3)

1. If mounting the Laser Level with the Tripod (3),

position the Tripod on a at and level ground surface.

Extend Tripod Legs to the desired height, using the

Bull’s Eye Vial (15) located on the Tripod Head (4).

See Figure 2, below.

Figure 2

Tripod

Head (4)

Bull’s Eye

Vial (15)

Tripod

(3)

2. Once the Tripod is level, lock the legs in

place using the clamps on each leg.

3. Then thread Wall Bracket (7A) onto

Tripod Head. See Figure 3, below.

Figure 3

Tripod

Head (4)

Wall

Bracket

(7A)

Height

Adjusting

Handle (13)

Height

Locking

Knob (14)

4. Once the Wall Bracket (7A) is secured on the head,

you can use the Height Adjusting Handle (13) to raise

the Level Housing to the desired height. Once the

desired height is reached, lock the height in place by

turning the Height Locking Knob (14). See Figure 3.

Mounting To Wall

1. The Laser Level may also be installed on a wall

surface without the Tripod. To do so, use the Wall

Bracket (7A) to secure the Laser Level to the wall.

2. First, set the Level Housing against the part of

the wall where you wish to install the Laser Level.

WARNING! Verify that installation surface has no

hidden utility lines before drilling or driving screws.

3. Use a pencil to mark drill holes through the

Wall Bracket (7A). See Figure 4, below.

Figure 4

Wall

Bracket

(7A)

4. Secure the Laser Level to the wall surface

using screws and plastic anchors (not included).

NOTE: The mounting screws must be long enough

to allow for the Wall Bracket frame to t over them.

5. Once installed on wall, level the Laser,

using the Leveling Knobs (8A) located

on each side of the Laser and the Level

Vials (9A) located at the top of the Laser.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Harbor Freight Tools Motorized Rotary Laser Level Kit Manual Page 4

Comments to this Manuals

Related products and manuals for Laser levels Harbor Freight Tools Motorized Rotary Laser Level Kit