Harbor Freight Tools 12Volt Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Page 2 For technical questions, please call 1-800-444-3353. SKU 66784
Save This Manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual near
the assembly diagram (or month and year of purchase
if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Safety Alert Symbol
and Signal Words
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol. It is
used to alert you to potential personal
injury hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert symbol, is used
to address practices not related to personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
WARNING – When using pumps, basic precautions
should always be followed, including the following:
Work Area
a. Keep the work area clean and well lighted.
Cluttered or dark areas increase the risks of
electric shock, re, and injury to persons.
b. Do not operate pumps in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Pumps create
sparks which may ignite the dust or fumes.
c. Keep bystanders, children, and visitors away
while operating the pump. Distractions are able
to result in the loss of control of the pump.
Electrical Safety
a. Do not expose pumps to rain or wet
conditions. Water entering a pump will
increase the risk of electric shock.
b. Do not abuse the Power Cables. Never use
the cables for carrying or pulling the pump.
Keep cables away from heat, oil, sharp edges
or moving parts. Damaged or entangled
cables increase the risk of electric shock.
Personal Safety
a. Stay alert, watch what you are doing and
use common sense when operating a pump.
Do not use a pump while you are tired or under
the inuence of drugs, alcohol or medication.
A moment of inattention while operating pumps
may result in serious personal injury.
b. Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to the power supply.
c. Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enables better
control of the pump in unexpected situations.
d. Use safety equipment. A dust mask,
non-skid safety shoes and a hard hat must
be used for the applicable conditions.
e. Wear ANSI-approved safety goggles
during setup and use.
f. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
Pump Use and Care
a. Do not force the pump. Use the correct pump for
your application. The correct pump will do the job
better and safer at the rate for which it was designed.
Page view 1
1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments