Page 8 For technical questions, please call 1-888-866-5797. Item 96755
SAFETY OPERATION MAINTENANCESETUP
General Operating Instructions
1� Push the End Clip forward and down to
release the Staple Channel latch� Pull
out the Staple Channel� See Figure B�
2� Insert a full strip of fasteners into the Staple
Channel� Push the Staple Channel back
into the Staple Gun Body� Make certain
that it is pushed all the way back into
place before operating the Staple Gun�
3� Determine whether or not the object
being stapled will necessitate extra force
from the Staple Gun� This will depend
primarily on the thickness of the item
being stapled� For instance, a large pad
of papers will need more force than one
or two sheets being stapled together�
4� Set the Depth Adjustment Knob accordingly�
5� Place the item to be stapled below the Driver
located on the front of the Staple Gun� Grasp
the Staple Gun with your fingers inserted
into the opening in the Housing and your
palm resting on the Handle� Squeeze and
pull down on the Handle to fire a fastener�
7� Test the Staple Gun using a scrap work
piece� Make certain that you have the Depth
Adjustment Knob set correctly, and that
the fasteners are placed as you desire�
8� To prevent accidents, clean, then store
the tool indoors out of children’s reach�
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1� BEFORE EACH USE, inspect the general
condition of the tool� Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation�
2� AFTER USE, wipe external surfaces
of the tool with clean cloth�
3� Remove dirt and debris from the Staple
Gun using a clean, soft cloth� Do not
use flammable corrosive or abrasive
solvents to clean the Staple Gun�
Cleaning and Removing the Staple Channel
1� Push the Retaining Clip at the front of
the Staple Gun forward to release the
Staple Channel� Pull the two tabs (located
midpoint on the bottom of the Staple Gun)
toward the back of the Staple Gun�
2� The Staple Channel is now free of
the Staple Gun and can be cleared
of any jammed fasteners�
(11 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals