Harbor Freight Tools 91176 User Manual

Model 91176ASSEMBLY AND OPERATING INSTRUCTIONS3491 Mission Oaks Blvd., Camarillo, CA 93011Visit our Web site at: http://www.harborfreight.comCopyright

When unpacking, check to make sure all the parts shown on the Parts List on page 14are included. If any parts are missing or broken, please call Harb

SKU 91176 PAGE 11NOTE: Always switch to a fresh battery when tool performance begins to diminish.Severe heat is most destructive to a battery; the m

SKU 91176 PAGE 12ASSEMBLY AND OPERATING INSTRUCTIONS (Continued)3. Set the speed by adjusting the Variable Speed Switch (5) to either 1 (low) or 2 (h

SKU 91176 PAGE 13INSPECTION, MAINTENANCE, AND CLEANING1. WARNING! Make sure the Trigger (16) of the Hammer Drill is in its “OFF”position and

SKU 91176 PAGE 14PARTS LISTTHE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLYDIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL

SKU 91176 PAGE 15ASSEMBLY DIAGRAMNOTE: Some parts are listed and shown for illustration purposes only, and are notavailable individually as replaceme

PRODUCT SPECIFICATIONSSAVE THIS MANUALYou will need this manual for the safety warnings and precautions, assembly,operating, inspection, maintenance a

ELECTRICAL SAFETY4. Grounded adapters/chargers must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinan

12. Avoid accidental starting. Be sure the Trigger is off before pluggingin. Carrying power tools with your finger on the Trigger, or adding a batte

23. Use only accessories that are recommended by the manufacturer for yourmodel. Accessories that may be suitable for one tool may become hazardouswh

SKU 91176 PAGE 67. Always remove the Battery Pack (14) before operation, inspection,maintenance, or cleaning procedures.8. Know what you are drilling

GROUNDINGWARNING!Improperly connecting the grounding wire can result in the risk of electricshock. Check with a qualified electrician if you are in d

FIGURE BSKU 91176 PAGE 8DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS4. Tools marked “Double Insulated” do not require grounding. They have a s

6. If you are using an extension cord outdoors, make sure it is marked with thesuffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor u