Harbor Freight Tools 56072 User Manual download pdf (Page 8)

SKU 56072 For technical questions, please call 1-800-444-3353. Page 8

be cleaned even if they are new or

appear clean. Allow all pieces to dry

completely.

Place fresh, clean bearing grease in 3.

the packer (not included).

With the grease-lled bearing packer 4.

in one hand and the Bearing (52) in

the other, press the Bear ing into the

grease, forcing the grease inside the

slots in the bearing, continue doing

this until every slot in the Bearing is

completely full of grease.

Do not get any dirt or debris on any 5.

part of the assembly. Secure with

Bearing Seal (51)

With each Tire in place, add a Wash-6.

er (55) and a Castle Nut (54) onto

the ends of the Axles. Tighten the

Castle Nuts to 20-25 ft. pounds, and

rotate each tire several turns to seat

the bearing. Back off the Castle Nut

one half turn. Insert a Cotter Pin (53)

through both the Axle and the Castle

Nut and bend the end of the Pin back

to hold it in place.

Log Splitter Assembly

Please Note: This item is extremely

difcult to assemble without heavy

equipment to lift and secure parts

in place on the item. The base and

main beam junction of the product

require the alignment of holes

with the four bolts and nuts used

to secure the two pieces together

during operation of the item. Do not

assemble without assistance. If you

do not feel entirely condent about

your ability to assemble the Log

Splitter correctly, contact a qualied

service professional to assemble the

Log Splitter.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments