SKU 93755 For technical questions, please call 1-800-444-3353. Page 5
ASSEMBLY INSTRUCTIONS
1. Wrap about 4” of pipe sealer tape (not included) around the male threads located
onthelowersectionoftheOilTube(5).ThenrmlyscrewanOilTubeCoupler
(7) onto the Oil Tube. (See Figure B.)
2. Wrap about 4” of pipe sealer tape around the male threads located on both the
upperandlowersectionsoftheOilTube(6).Thenrmlyscrewoneendofthe
Oil Tube onto the Oil Tube Coupler (7).
3. Firmly screw the remaining Oil Tube Coupler (7) onto the lower section of the Oil
Tube (6).
4. Wrap about 4” of pipe sealer tape around the male threads located on both the
upperandlowersectionsoftheremainingOilTube(8).Thenrmlyscrewone
end of the Oil Tube into the Oil Tube Coupler (7).
5. InserttheOilFilter(9)intotheInletPlug(10).Then,rmlyscrewtheInletPlug
onto the lower section of the Oil Tube (8).
6. Unscrew and remove the large bung from the barrel of liquid to be pumped.
7. Insert the lower section of the Barrel Pump through the bung of the barrel. Then
rmlyscrewtheBarrelPumpintothefemalethreadsofthebung.
8. To adjust the length of the tube in the barrel, grasp the regulator assembly and
twist it up or down on the pipe.
FIGURE B
INLET PLUG (10)
OIL FILTER (9)
OIL TUBE (8)
OIL TUBE COUPLER (7)
OIL TUBE COUPLER (7)
OIL TUBE (6)
OIL TUBE (5)
REV 08j
Comments to this Manuals