Harbor Freight Tools 93442 User Manual download pdf (Page 10)

SKU 93442 For technical questions, please call 1-800-444-3353 PAGE 10

5. Attach the Top Stand (4) to the Vertical Stand (2) and Middle Stand (3).

(See Assy. Diagram.)

6. Carefully set the Large Bowl (5) on the Bottom Stand (1). (See Assy. Diagram.)

7. Carefully set three Small Bowls (6) on the Middle Stand (3) and Top Stand (4).

(See Assy. Diagram.)

8. Carefully set the Jug (7) on the Top Stand (4). (See Assy. Diagram.)

9. Route the Hose (8) downward into the Large Bowl (5). (See Assy. Diagram.)

10. Set the Pump (9) in the middle of the Large Bowl (5). (See Assy. Diagram.)

11. Connect the Hose (8) to the Pump (9). (See Assy. Diagram.)

12. Make sure the Fountain is unplugged from its electrical outlet. Then, move the

Flow Regulator of the Pump (9) towards the “+” position. NOTE: After running

the Fountain, it may be necessary to adjust the rate of water ﬂow. If so,

disconnect the Pump from its electrical outlet. Moving the Flow Regulator

towards the “+” position increases the rate of ﬂow. Moving the Flow Regulator

towards the “--” position decreases the rate of ﬂow. (See Figure F.)

13. Fill the Large Bowl (5) with a minimum 2” of water. Do not overﬁll the Large

Bowl. (See Assy. Diagram and Figure F.)

PUMP (9)

FLOW

REGULATOR

MINIMUM WATER LEVEL

FOR BEST RESULTS,

COMPLETELY SUBMERGE THE PUMP.

FIGURE F

1 2 ... 5 6 7 8 9 10 11 12 13 14

No comments

Harbor Freight Tools 93442 User Manual Page 10