Harbor Freight Tools 4_in_1 Manual download pdf (Page 10)

Page 10 For technical questions, please call 1-888-866-5797. Item 62374

SAFETY OPERATION MAINTENANCESETUP

Maintenance and Servicing

Procedures not specifically explained in this manual must

be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY: Unplug the Power Pack, turn the Clamp Power Switch off and allow

Power Pack to cool completely before performing any inspection, maintenance, or cleaning procedures.

1. BEFORE EACH USE, inspect the general

condition of the Power Pack. Check for:

• loose hardware,

• cracked or broken parts,

• damaged electrical wiring or cable insulation, and

• any other condition that may

affect its safe operation.

2. Keep unit clean and clamps free

of dirt, debris, or grease.

3. For longer working life, protect Power

Pack from sunlight and moisture.

4. AFTER USE, wipe external surfaces of

the Power Pack with clean cloth.

5. CONTAINS NON-SPILLABLE, SEALED LEAD-

ACID BATTERY. BATTERY MUST BE RECYCLED.

Battery Replacement and Disposal

LEAD BATTERY MUST BE RECYCLED.

WARNING! To prevent damage or injury, replacement battery must be identical to original.

Replace the Battery when the red light comes on while

pressing the Battery Test button after recharging.

1. Remove all screws from the back of

the case and lift off the panel.

2. Lift out the Battery without damaging the circuit board.

Note: Notice how the red and black cables connect

to the old battery and make sure to keep them in

place, connecting them to the new battery.

3. Detach the recharging wires and Battery

Cables from the battery terminals.

4. Position the replacement battery with the label

facing out, and make sure the red (+) recharging

wire and Battery Cable is attached to the

positive (+) battery terminal. Connect both of

the recharging wires and Battery Cables.

5. Carefully slide the Battery into the compartment

without damaging the circuit board.

6. Replace the back panel and the screws.

Call 1-800-822-8837 for battery recycling.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Harbor Freight Tools 4_in_1 Manual Page 10

Comments to this Manuals

Related products and manuals for Air compressors Harbor Freight Tools 4_in_1